Follow this instruction,
Please refer to the following steps to
do a 'RESET' upgrade.
1. Manually set your PC's IP to "192.168.1.*"(for example,192.168.1.10) in the TCP/IP property.
2. Switch off the router.
3. Press the reset button and hold it.
4. Switch on the router,then release the button.The router now is in TFTP mode(the most left LEDs on the panel will blink simultaneously).
5. Run the "Router Tools – Firmware Upgrade Utility" and type "192.168.1.1" in "RouterIP".
6. Select the .rst file in "Firmware file" and press "Send".
7. Upgrade will be finished when the LEDs blink normally again.
1. Manually set your PC's IP to "192.168.1.*"(for example,192.168.1.10) in the TCP/IP property.
2. Switch off the router.
3. Press the reset button and hold it.
4. Switch on the router,then release the button.The router now is in TFTP mode(the most left LEDs on the panel will blink simultaneously).
5. Run the "Router Tools – Firmware Upgrade Utility" and type "192.168.1.1" in "RouterIP".
6. Select the .rst file in "Firmware file" and press "Send".
7. Upgrade will be finished when the LEDs blink normally again.
No comments:
Post a Comment
Silahkan tinggalkan Komentar anda di sini ...!!!